Arnite? A06 300
聚對苯二甲酸乙二酯
產品說明:
Very High Viscosity, Transparent, Extrusion
Special Features:
Arnite? (PBT, PET and blends) are high-performance engineering plastics that combine high strength and rigidity with excellent processing characteristics. As a result, Arnite? A (PET) and Arnite? T (PBT) are well suited for a broad range of automotive, electrical & electronic and consumer goods applications.
A wide portfolio of Arnite? is available including unreinforced, reinforced and flame retardant grades.
密度 | 1.40 | g/cm3 | ISO 1183 |
吸水率 |
|
| ISO 62 |
飽和, 73°F | 0.75 | % |
|
平衡, 73°F, 50% RH | 0.30 | % |
|
熔融溫度 2 | 491 | °F | ISO 11357-3 |
線形熱膨脹系數 |
|
| ISO 11359-2 |
流動 | 4.4E-5 | in/in/°F |
|
橫向 | 4.4E-5 | in/in/°F |
|
體積電阻率 | > 1.0E+15 | ohms·cm | IEC 60093 |
熔體導熱性 | 1.7 | Btu·in/hr/ft2/°F |
|
Specific Heat Capacity of Melt | 0.490 | Btu/lb/°F |
|
RSV - m-cresol, 1g/100ml | 2.04 |
| 內部方法 |
干燥溫度 | 212 到 248 | °F |
|
干燥時間 | 3.0 到 12 | hr |
|
料筒后部溫度 | 518 到 536 | °F |
|
料筒中部溫度 | 518 到 554 | °F |
|
料筒前部溫度 | 518 到 554 | °F |
|
射嘴溫度 | 518 到 554 | °F |
|
加工（熔體）溫度 | 518 到 554 | °F |
|
模具溫度 | 266 到 284 | °F |
|
注射速度 | 中等偏快 |
|
|
背壓 | 435 到 1450 | psi |
|
螺桿壓縮比 | 2.5:1.0 |
|
|
如需恩驊力（Envalior）原廠物性表及相關文件，請聯系我司工作人員，謝謝！
