Arnite? A06 101
聚對苯二甲酸乙二酯
產品說明:
Very High Viscosity, Extrusion
Special Features:
Arnite? (PBT, PET and blends) are high-performance engineering plastics that combine high strength and rigidity with excellent processing characteristics. As a result, Arnite? A (PET) and Arnite? T (PBT) are well suited for a broad range of automotive, electrical & electronic and consumer goods applications.
A wide portfolio of Arnite? is available including unreinforced, reinforced and flame retardant grades.
密度 | 1.39 | g/cm3 | ISO 1183 |
熔融體積流量（MVR） (270°C/2.16 kg) | 0.397 | in3/10min | ISO 1133 |
吸水率 (平衡, 73°F, 50% RH) | 0.30 | % | ISO 62 |
拉伸模量 | 363000 | psi | ISO 527-2 |
拉伸應力 (屈服) | 7980 | psi | ISO 527-2 |
拉伸應變 (屈服) | 4.0 | % | ISO 527-2 |
標稱拉伸斷裂應變 | > 50 | % | ISO 527-2 |
簡支梁缺口沖擊強度 (73°F) | 1.9 | ft·lb/in2 | ISO 179/1eA |
體積電阻率 | > 1.0E+15 | ohms·cm | IEC 60093 |
可燃性等級 (0.04 in) | HB |
| IEC 60695-11-10, -20 |
極限氧指數 | 25 | % | ISO 4589-2 |
RSV - m-cresol, 1g/100ml | 2.13 |
| 內部方法 |
干燥溫度 | 212 到 248 | °F |
|
干燥時間 | 3.0 到 12 | hr |
|
料筒后部溫度 | 518 到 536 | °F |
|
料筒中部溫度 | 518 到 554 | °F |
|
料筒前部溫度 | 518 到 554 | °F |
|
射嘴溫度 | 518 到 554 | °F |
|
加工（熔體）溫度 | 518 到 554 | °F |
|
模具溫度 | 266 到 284 | °F |
|
注射速度 | 中等偏快 |
|
|
背壓 | 435 到 1450 | psi |
|
螺桿壓縮比 | 2.5:1.0 |
|
|
如需恩驊力（Envalior）原廠物性表及相關文件，請聯系我司工作人員，謝謝！
