Stanyl? TS350
聚酰胺 46
產品說明:
Unreinforced, Flame Retardant
Special Features:
Stanyl? is our high-performance polyamide 46 used for applications in automotive, E&E, gears and outdoor power equipments.
Stanyl is a high performance polyamide that provides unmatched performance and value for demanding applications in which superior heat resistance, design stiffness, wear & friction and process flow qualities are required.
Because Stanyl retains its mechanical properties at high temperatures up to 220°C, this makes it ideal for extremely high-performance applications, where it outperforms PPA, PA6T, PA9T, and often PPS and LCP.
密度 | 1.43 | -- | g/cm3 | ISO 1183 |
收縮率 |
|
|
| ISO 294-4 |
橫向流量 | 1.5 | -- | % |
|
流量 | 1.5 | -- | % |
|
吸水率 |
|
|
| ISO 62 |
飽和, 73°F | 8.6 | -- | % |
|
平衡, 73°F, 50% RH | 2.4 | -- | % |
|
拉伸模量 | 493000 | -- | psi | ISO 527-2 |
拉伸應力 (屈服) | 11600 | -- | psi | ISO 527-2 |
拉伸應變 (屈服) | 5.0 | -- | % | ISO 527-2 |
標稱拉伸斷裂應變 | 7.0 | -- | % | ISO 527-2 |
彎曲模量 | 464000 | -- | psi | ISO 178 |
簡支梁缺口沖擊強度 |
|
|
| ISO 179/1eA |
-22°F | 1.4 | -- | ft·lb/in2 |
|
73°F | 1.9 | -- | ft·lb/in2 |
|
熱變形溫度 (264 psi, 未退火) | 374 | -- | °F | ISO 75-2/A |
玻璃轉化溫度 3 | 167 | -- | °F | ISO 11357-2 |
熔融溫度 3 | 563 | -- | °F | ISO 11357-3 |
線形熱膨脹系數 |
|
|
| ISO 11359-2 |
流動 | 4.4E-5 | -- | in/in/°F |
|
橫向 | 5.0E-5 | -- | in/in/°F |
|
體積電阻率 | 1.0E+15 | 1.0E+9 | ohms·cm | IEC 60093 |
介電強度 | 760 | 640 | V/mil | IEC 60243-1 |
相對電容率 |
|
|
| IEC 60250 |
100 Hz | 3.80 | 10.0 |
|
|
1 MHz | 3.50 | 4.10 |
|
|
耗散因數 |
|
|
| IEC 60250 |
100 Hz | 5.0E-3 | 0.28 |
|
|
1 MHz | 0.020 | 0.080 |
|
|
可燃性等級 |
|
|
| IEC 60695-11-10, -20 |
0.030 in | V-0 | -- |
|
|
0.06 in | V-0 | -- |
|
|
極限氧指數 | 29 | -- | % | ISO 4589-2 |
熔體密度 | 1.14 | -- | g/cm3 |
|
熔體導熱性 | 1.7 | -- | Btu·in/hr/ft2/°F |
|
干燥溫度 | 176 | °F |
干燥時間 | 4.0 到 8.0 | hr |
料筒后部溫度 | 536 到 608 | °F |
料筒中部溫度 | 572 到 608 | °F |
料筒前部溫度 | 572 到 608 | °F |
射嘴溫度 | 572 到 608 | °F |
加工（熔體）溫度 | 590 到 608 | °F |
模具溫度 | 176 到 248 | °F |
注射速度 | 中等偏快 |
|
背壓 | 290 到 1450 | psi |
螺桿壓縮比 | 2.5:1.0 |
|
如需恩驊力（Envalior）原廠物性表及相關文件，請聯系我司工作人員，謝謝！
