ACRYLITE? H15
Polymethyl Methacrylate Acrylic
ACRYLITE? H15 acrylic polymer is an amorphous thermoplastic molding and extrusion compound based on polymethyl methacrylate (PMMA).
Typical properties of ACRYLITE? acrylic polymers are:
The special properties of ACRYLITE H15 polymer are:
Application:
Used for injection molding and extrusion of optical and technical parts.
Features | - Amorphous，Good Colorability，Good Flow，High Clarity，High Hardness，High Light Transmission，High Melt Strength，High Scratch Resistance，High Strength，Medium Heat Resistance，UV Absorbing，Weather Resistant
|
Uses | - Automotive Applications，Displays，Electrical/Electronic Applications，Engineering Parts，Lenses，Lighting Applications，Medical/Healthcare Applications，Optical Applications，Piping，Profiles，Rods，Tubing
|
Agency Ratings | |
Appearance | |
Forms | |
Processing Method | - Extrusion，Injection Molding，Pipe Extrusion，Profile Extrusion
|
Density / Specific Gravity | 1.19 |
| ASTM D792 |
Apparent (Bulk) Density | 0.66 | g/cm3 | ASTM D1895 |
Melt Mass-Flow Rate (MFR) (230°C/3.8 kg) | 2.2 | g/10 min | ASTM D1238 |
Molding Shrinkage - Flow | 4.0E-3 to 7.0E-3 | in/in | ASTM D955 |
Water Absorption (Equilibrium) | < 0.30 | % | ASTM D570 |
Rockwell Hardness (M-Scale) | 95 |
| ASTM D785 |
Tensile Modulus | 470000 | psi | ASTM D638 |
Tensile Strength | 9800 | psi | ASTM D638 |
Tensile Elongation |
|
| ASTM D638 |
Yield | 4.0 to 6.0 | % |
|
Break | 4.0 to 6.0 | % |
|
Flexural Modulus | 490000 | psi | ASTM D790 |
Flexural Strength | 17000 | psi | ASTM D790 |
Notched Izod Impact (73°F, 0.250 in) | 0.36 | ft·lb/in | ASTM D256 |
Deflection Temperature Under Load (264 psi, Annealed, 0.250 in) | 203 | °F | ASTM D648 |
Vicat Softening Temperature | 221 | °F | ASTM D1525 |
CLTE - Flow (32 to 212°F) | 4.0E-5 | in/in/°F | ASTM D696 |
Transmittance (126 mil) | 92.0 | % | ASTM D1003 |
Haze (126 mil) | < 1.0 | % | ASTM D1003 |
Yellowness Index (0.126 in) | < 1.0 | YI | ASTM D1925 |
