国产乱子伦一区二区三区,久久96国产精品久久久,精品91在线

Terlux? 2812

Manufacturer: INEOS
Produced At: Korea / China
Product Category: Methyl Methacrylate / ABS
Product No: Terlux 2812
Product Quantity: 25KG / BAG
Product Features: Balanced Stiffness/Toughness，Chemical Resistant，Good Flow，Good Stiffness，Good Surface Finish，High Clarity，High Impact Resistance

Product information

Terlux? 2812

Methyl Methacrylate / ABS

INEOS Styrolution Group GmbH

Product Description:

Terlux? 2812 is an easy-flowing injection molding grade based on a MABS polymer. Terlux? 2812 offers an unique combination of properties, such as a balanced stiffness/toughness ratio and the high transparency well known in SAN molding compositions.

FEATURES

Excellent transparency

Good resistance to chemicals

Good Stiffness and surface finish

High impact strength

Easy-flow grade

APPLICATIONS

Cosmetic packaging

Homeware

Housings

Toys, sport and leisure

Features	Balanced Stiffness/Toughness，Chemical Resistant，Good Flow，Good Stiffness，Good Surface Finish，High Clarity，High Impact Resistance
Uses	Cosmetic PackagingHousehold GoodsHousingsSporting GoodsToys
Appearance	Clear/Transparent
Forms	Pellets
Processing Method	Injection Molding
Multi-Point Data	Isothermal Stress vs. Strain (ISO 11403-1) Secant Modulus vs. Strain (ISO 11403-1) Shear Modulus vs. Temperature (ISO 11403-1) Viscosity vs. Shear Rate (ISO 11403-2)

Physical	Nominal Value	Unit	Test Method
Density	1.08	g/cm3	ISO 1183
Melt Volume-Flow Rate (MVR)			ISO 1133
220°C/10.0 kg	0.488	in3/10min
220°C/21.6 kg	2.75	in3/10min
Molding Shrinkage	0.40 to 0.70	%	ISO 294-4
Water Absorption (Saturation, 73°F)	0.70	%	ISO 62
Hardness	Nominal Value	Unit	Test Method
Ball Indentation Hardness	10900	psi	ISO 2039-1

Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus	276000	psi	ISO 527-2
Tensile Stress (Yield, 73°F)	6090	psi	ISO 527-2
Tensile Strain (Yield, 73°F)	4.0	%	ISO 527-2
Nominal Tensile Strain at Break (73°F)	20	%	ISO 527-2
Flexural Stress	8700	psi	ISO 178
Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength			ISO 179
-22°F	0.95	ft·lb/in2
73°F	2.4	ft·lb/in2
Charpy Unnotched Impact Strength			ISO 179
-22°F	33	ft·lb/in2
73°F	52	ft·lb/in2

Thermal	Nominal Value	Unit	Test Method
Heat Deflection Temperature 3
66 psi, Annealed	199	°F	ISO 75-2/B
264 psi, Annealed	189	°F	ISO 75-2/A
Vicat Softening Temperature	189	°F	ISO 306/B50
CLTE - Flow	4.4E-5 to 6.1E-5	in/in/°F	ISO 11359-2
Thermal Conductivity	1.2	Btu·in/hr/ft2/°F	DIN 52612

Electrical	Nominal Value	Unit	Test Method
Surface Resistivity	1.0E+15	ohms	IEC 60093
Volume Resistivity	1.0E+16	ohms·cm	IEC 60093
Dielectric Constant (100 Hz)	3.00		IEC 60250
Dissipation Factor			IEC 60250
100 Hz	0.016
1 MHz	0.013

Optical	Nominal Value		Test Method
Refractive Index	1.540		ISO 489

Injection	Nominal Value	Unit
Drying Temperature	158	°F
Drying Time	2.0	hr
Processing (Melt) Temp	446 to 500	°F
Mold Temperature	122 to 167	°F
Injection Velocity	472	in/min

久久伊人免费视频-国产伦理一区-91亚洲视频-玖玖玖精品-久久99国产综合精品-一本一本久久a久久精品综合麻豆

Products

Products

Terlux? 2812

Products are widely used in plastic modification, automotive, construction, electrical and electronic, industrial, daily necessities and other fields

Online Service