加勒比一本heyzo高清视频,在线中文字幕国产一区,国产成年女一区二区三区

Amodel? A-1625 HS

Manufacturer: SOLVAY
Produced At: Import/ China
Product Category: Amodel PPA
Product No: Amodel A-1625 HS
Product Quantity: 25KG / BAG
Product Features: Chemical Resistant，Creep Resistant，Good Dimensional Stability，Good Stiffness，High Heat Resistance，High Stiffness，High Temperature Strength，Low Moisture Absorption

Product information

Amodel? A-1625 HS

Polyphthalamide

Solvay Specialty Polymers

Product Description:

Amodel? A-1625 HS is a carbon and glass-reinforced, heat-stabilized grade of polyphthalamide (PPA). It is formulated for applications requiring the dissipation of static charge. This material is well suited for fuel systems applications requiring low permeation, low swell, and high thermal resistance. It can also be used for components of electrical/electronic systems requiring high strength and stiffness, as well as static charge dissipation.

Amodel? A-1625 HS provides low moisture absorption, excellent dimensional stability and has creep resistance superior to other electrostatic dissipative materials.

Black: A-1625 HS BK 324

Filler / Reinforcement	Glass\Carbon Fiber
Additive	Heat Stabilizer
Features	Chemical Resistant，Creep Resistant，Good Dimensional Stability，Good Stiffness，High Heat Resistance，High Stiffness，High Temperature Strength，Low Moisture Absorption
Uses	Automotive Applications，Automotive Electronics，Automotive Under the Hood，Connectors，Electrical/Electronic Applications，Fuel Lines
RoHS Compliance	Contact Manufacturer
Appearance	Black
Forms	Pellets
Processing Method	Injection Molding

Physical	Nominal Value	Unit	Test Method
Density	1.32	g/cm3	ISO 1183/A
Molding Shrinkage			ISO 294-4
Across Flow	0.60	%
Flow	0.40	%
Water Absorption (24 hr, 2.00 in)	0.32	%	ASTM D570

Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus
--	2.20E+6	psi	ASTM D638
--	2.18E+6	psi	ISO 527-2
Tensile Strength	29700	psi	ASTM D638, ISO 527-2
Tensile Elongation
Break	2.5	%	ASTM D638
Break	2.4	%	ISO 527-2
Flexural Modulus	1.96E+6	psi	ISO 178
Flexural Stress	43500	psi	ISO 178
Impact	Nominal Value	Unit	Test Method
Notched Izod Impact
--	2.2	ft·lb/in	ASTM D256
-40°F	3.8	ft·lb/in2	ISO 180
73°F	5.2	ft·lb/in2	ISO 180
Unnotched Izod Impact Strength			ISO 180
-40°F	24	ft·lb/in2
73°F	24	ft·lb/in2

Thermal	Nominal Value	Unit	Test Method
Heat Deflection Temperature
66 psi, Unannealed	545	°F	ISO 75-2/B
264 psi, Unannealed	518	°F	ASTM D648
264 psi, Unannealed	527	°F	ISO 75-2/A

Electrical	Nominal Value	Unit	Test Method
Volume Resistivity 2	2.4E+3	ohms·cm	SAE J1645

Injection	Nominal Value	Unit
Drying Temperature	248	°F
Drying Time	4.0	hr
Suggested Max Moisture	0.030 to 0.060	%
Rear Temperature	590	°F
Front Temperature	608	°F
Processing (Melt) Temp	608 to 626	°F
Mold Temperature	275	°F
Injection Notes
Storage: Amodel? compounds are shipped in moisture-resistant packages at moisture levels according to specifications. Sealed, undamaged bags should be preferably stored in a dry room at a maximum temperature of 50°C (122°F) and should be protected from possible damage. If only a portion of a package is used, the remaining material should be transferred into a sealable container. It is recommended that Amodel? resins be dried prior to molding following the recommendations found in this datasheet and/or in the Amodel? processing guide.

Products

Products

Amodel? A-1625 HS

Products are widely used in plastic modification, automotive, construction, electrical and electronic, industrial, daily necessities and other fields

Online Service