国产高清不卡,欧美日韩国产亚洲乱码字幕,国产一区二区三区精品久久久

Amodel? A-1130 FW

Manufacturer: SOLVAY
Produced At: Import/ China
Product Category: Amodel PPA
Product No: Amodel A-1130 FW
Product Quantity: 25KG / BAG
Product Features: Chemical Resistant，Creep Resistant，Good Dimensional Stability，Good Stiffness，High Strength，Low Friction，Wear Resistant

Product information

Amodel? A-1130 FW

Polyphthalamide

Solvay Specialty Polymers

Product Description:

Amodel? A-1130 FW is a 30% glass-fiber reinforced polyphthalamide (PPA) grade containing a solid lubricant. This resin was designed for moderate-pressure, low-velocity friction and wear applications.

Black: A-1130 FW BK 324

Filler / Reinforcement	Glass Fiber, 30% Filler by Weight
Additive	PTFE Lubricant
Features	Chemical Resistant，Creep Resistant，Good Dimensional Stability，Good Stiffness，High Strength，Low Friction，Wear Resistant
Uses	Bearings，Bushings，F(xiàn)iltersGears
RoHS Compliance	RoHS Compliant
Appearance	Black
Forms	Pellets
Processing Method	Injection Molding

Physical	Nominal Value	Unit	Test Method
Density	1.55	g/cm3	ISO 1183/A

Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus	1.62E+6	psi	ISO 527-2
Tensile Stress (Break)	27100	psi	ISO 527-2
Tensile Strain (Break)	2.0	%	ISO 527-2
Flexural Modulus	1.39E+6	psi	ISO 178
Flexural Stress	36500	psi	ISO 178

Thermal	Nominal Value	Unit	Test Method
Heat Deflection Temperature (264 psi, Unannealed)	545	°F	ISO 75-2/A
Melting Temperature	595	°F	ISO 11357-3

Injection	Nominal Value	Unit
Drying Temperature	230	°F
Drying Time	4.0	hr
Suggested Max Moisture	0.030 to 0.060	%
Rear Temperature	580 to 605	°F
Front Temperature	600 to 625	°F
Processing (Melt) Temp	625 to 650	°F
Mold Temperature	275	°F
Injection Notes
Storage: Amodel? PPA compounds are shipped in moisture-resistant packages at moisture levels according to specifications. Sealed, undamaged bags should be preferably stored in a dry room at a maximum temperature of 50°C (122°F) and should be protected from possible damage. If only a portion of a package is used, the remaining material should be transferred into a sealable container. It is recommended that Amodel? PPA resins be dried prior to molding following the recommendations found in this datasheet and/or in the Amodel? PPA processing guide.

Products

Products

Amodel? A-1130 FW

Products are widely used in plastic modification, automotive, construction, electrical and electronic, industrial, daily necessities and other fields

Online Service