99久久精品费精品国产一区二区,久草新视频,正在播放国产露脸做91

PLANAC BT-2230-11

Manufacturer: TOYOBO
Produced At: Japan / China
Product Category: PBT
Product No: PLANAC BT-2230-11
Product Quantity: 25KG / BAG
Product Features: Flame Rated/ Hydrolysis Resistant/30%GF

Product information

PLANAC BT-2230-11

Polybutylene Terephthalate

TOYOBO America, Inc.

Product Description:

PLANAC BT-2230-11 is a Polybutylene Terephthalate (PBT) product filled with 30% glass fiber. It can be processed by injection molding and is available in Asia Pacific or North America. Primary characteristic: flame rated.

Filler / Reinforcement	Glass Fiber, 30% Filler by Weight
Features	Hydrolysis Resistant
Forms	Pellets
Processing Method	Injection Molding

Physical	Nominal Value	Unit	Test Method
Density / Specific Gravity	1.65		ASTM D792
Molding Shrinkage			ASTM D955
Flow	3.0E-3	in/in
Across Flow	0.013	in/in
Water Absorption (73°F, 24 hr)	0.050	%	ASTM D570
Hardness	Nominal Value	Unit	Test Method
Rockwell Hardness (R-Scale)	118		ASTM D785

Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus	1.60E+6	psi	ASTM D638
Tensile Strength	20300	psi	ASTM D638
Tensile Elongation (Break)	2.5	%	ASTM D638
Flexural Modulus	1.45E+6	psi	ASTM D790
Flexural Strength	31900	psi	ASTM D790
Compressive Strength	18900	psi	ASTM D695
Impact	Nominal Value	Unit	Test Method
Notched Izod Impact	1.8	ft·lb/in	ASTM D256
Unnotched Izod Impact	12	ft·lb/in	ASTM D256

Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load (264 psi, Unannealed)	401	°F	ASTM D648
CLTE - Flow (-22 to 212°F)	1.4E-5	in/in/°F	ASTM D696

Electrical	Nominal Value	Unit	Test Method
Volume Resistivity	1.0E+16	ohms·cm	ASTM D257
Dielectric Strength (0.0630 in)	660	V/mil	ASTM D149
Dielectric Constant (1 MHz)	3.60		ASTM D150
Dissipation Factor (1 MHz)	0.020		ASTM D150
Arc Resistance	120	sec	ASTM D495
Comparative Tracking Index (CTI)	260	V	UL 746
Flammability	Nominal Value	Unit	Test Method
Flame Rating (0.012 in)	V-0		UL 94

Additional Information
The value shown for Comparative Track Index, UL 746, was tested in accordance with ASTM D3638. Flexural Elongation @ Break, ASTM D790: 3%

Injection	Nominal Value	Unit
Rear Temperature	464 to 518	°F
Middle Temperature	464 to 518	°F
Front Temperature	464 to 518	°F
Mold Temperature	122 to 212	°F

久久伊人免费视频-国产伦理一区-91亚洲视频-玖玖玖精品-久久99国产综合精品-一本一本久久a久久精品综合麻豆

Products

Products

PLANAC BT-2230-11

Products are widely used in plastic modification, automotive, construction, electrical and electronic, industrial, daily necessities and other fields

Online Service