国产精品视频久久久久,久久久久久久人妻无码中文字幕爆 ,国产成人毛片在线视频

PLANAC BT-2215-60

Manufacturer: TOYOBO
Produced At: Japan / China
Product Category: PBT
Product No: PLANAC BT-2215-60
Product Quantity: 25KG / BAG
Product Features: Flame Rated/Good Toughness/High Flow/15%GF

Product information

PLANAC BT-2215-60

Polybutylene Terephthalate

TOYOBO America, Inc.

Product Description:

PLANAC BT-2215-60 is a Polybutylene Terephthalate (PBT) product filled with 15% glass fiber. It can be processed by injection molding and is available in Asia Pacific or North America.

Characteristics include:

Flame Rated

Good Toughness

High Flow

Filler / Reinforcement	Glass Fiber, 15% Filler by Weight
Features	Good ToughnessHigh Flow
Forms	Pellets
Processing Method	Injection Molding

Physical	Nominal Value	Unit	Test Method
Density / Specific Gravity	1.54		ASTM D792
Molding Shrinkage			ASTM D955
Flow	4.0E-3	in/in
Across Flow	0.013	in/in
Water Absorption (73°F, 24 hr)	0.070	%	ASTM D570
Hardness	Nominal Value	Unit	Test Method
Rockwell Hardness (R-Scale)	118		ASTM D785

Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus	870000	psi	ASTM D638
Tensile Strength	13100	psi	ASTM D638
Tensile Elongation (Break)	3.8	%	ASTM D638
Flexural Modulus	725000	psi	ASTM D790
Flexural Strength	21000	psi	ASTM D790
Compressive Strength	16000	psi	ASTM D695
Impact	Nominal Value	Unit	Test Method
Notched Izod Impact	1.4	ft·lb/in	ASTM D256
Unnotched Izod Impact	8.4	ft·lb/in	ASTM D256

Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load (264 psi, Unannealed)	392	°F	ASTM D648
CLTE - Flow (-22 to 212°F)	2.7E-5	in/in/°F	ASTM D696

Electrical	Nominal Value	Unit	Test Method
Volume Resistivity	1.0E+16	ohms·cm	ASTM D257
Dielectric Strength (0.0630 in)	660	V/mil	ASTM D149
Dielectric Constant (1 MHz)	3.60		ASTM D150
Dissipation Factor (1 MHz)	0.020		ASTM D150
Arc Resistance	120	sec	ASTM D495
Comparative Tracking Index (CTI)	240	V	UL 746
Flammability	Nominal Value	Unit	Test Method
Flame Rating (0.012 in)	V-0		UL 94

Additional Information
The value shown for Comparative Track Index, UL 746, was tested in accordance with ASTM D3638. Flexural Elongation @ Break, ASTM D790: 4.2%

Injection	Nominal Value	Unit
Rear Temperature	464 to 518	°F
Middle Temperature	464 to 518	°F
Front Temperature	464 to 518	°F
Mold Temperature	122 to 212	°F

久久伊人免费视频-国产伦理一区-91亚洲视频-玖玖玖精品-久久99国产综合精品-一本一本久久a久久精品综合麻豆

Products

Products

PLANAC BT-2215-60

Products are widely used in plastic modification, automotive, construction, electrical and electronic, industrial, daily necessities and other fields

Online Service