日韩av在线中文字幕,黄片毛片一级,五级黄高潮片90分钟视频

<del id="aewuc"></del>

Ultramid? B3L

Manufacturer: BASF
Produced At: Europe / China
Product Category: Polyamide 6（PA6）
Product No: Ultramid B3L
Product Quantity: 25KG / BAG
Product Features: Fast Molding Cycle、Good Flow、Good Impact Resistance、Impact Modified、Oil Resistant

Product information

Ultramid? B3L

Polyamide 6

BASF Corporation

Product Description:

Ultramid B3L is an impact-modified, easy flowing injection molding PA6 grade for fast processing.

Applications
Typical applications include impact-resistant articles such as housings, fittings, small parts and anchors.

Additive	Impact Modifier
Features	Fast Molding Cycle、Good Flow、Good Impact Resistance、Impact Modified、Oil Resistant
Uses	FittingsHousings
Agency Ratings	EC 1907/2006 (REACH)
RoHS Compliance	RoHS Compliant
Forms	Pellets
Processing Method	Injection Molding
Multi-Point Data	Creep Modulus vs. Time (ISO 11403-1) Isochronous Stress vs. Strain (ISO 11403-1) Isothermal Stress vs. Strain (ISO 11403-1) Secant Modulus vs. Strain (ISO 11403-1) Shear Modulus vs. Temperature (ISO 11403-1) Viscosity vs. Shear Rate (ISO 11403-2)

Physical	Dry	Conditioned	Unit	Test Method
Density / Specific Gravity
--	1.10	--		ASTM D792
--	1.10	--	g/cm3	ISO 1183
Melt Volume-Flow Rate (MVR)(275°C/5.0 kg)	6.10	--	in3/10min	ISO 1133
Molding Shrinkage - Flow (0.125 in)	0.011	--	in/in
Water Absorption
Saturation	9.0	--	%	ASTM D570
Saturation, 73°F	9.0	--	%	ISO 62
Equilibrium, 50% RH	2.5	--	%	ASTM D570
Equilibrium, 73°F, 50% RH	2.5	--	%	ISO 62

Mechanical	Dry	Conditioned	Unit	Test Method
Tensile Modulus (73°F)	406000	131000	psi	ISO 527-2
Tensile Strength
Yield, 73°F	10000	--	psi	ASTM D638
Yield, 73°F	10200	5080	psi	ISO 527-2
Tensile Elongation
Yield, 73°F	4.0	--	%	ASTM D638
Yield, 73°F	4.0	18	%	ISO 527-2
Break, 73°F	25	--	%	ASTM D638
Nominal Tensile Strain at Break(73°F)	25	> 50	%	ISO 527-2
Flexural Modulus
73°F	363000	--	psi	ASTM D790
73°F	334000	--	psi	ISO 178
Impact	Dry	Conditioned	Unit	Test Method
Charpy Notched Impact Strength				ISO 179
-22°F	2.9	--	ft·lb/in2
73°F	4.8 ft·lb/in2	No Break
Charpy Unnotched Impact Strength				ISO 179
-22°F	No Break	--
73°F	No Break	No Break
Notched Izod Impact
-40°F	0.99	--	ft·lb/in	ASTM D256
73°F	2.5	--	ft·lb/in	ASTM D256
73°F	7.1	--	ft·lb/in2	ISO 180

Thermal	Dry	Conditioned	Unit	Test Method
Deflection Temperature Under Load
66 psi, Unannealed	320	--	°F	ASTM D648
66 psi, Unannealed	302	--	°F	ISO 75-2/B
264 psi, Unannealed	151	--	°F	ASTM D648
264 psi, Unannealed	149	--	°F	ISO 75-2/A
Peak Melting Temperature	428	--	°F	ASTM D3418, ISO 3146
CLTE - Flow
--	2.2E-5	--	in/in/°F	ASTM E831
--	4.7E-5	--	in/in/°F
RTI Elec				UL 746
0.016 in	149	--	°F
0.031 in	149	--	°F
0.06 in	149	--	°F
0.12 in	149	--	°F
RTI Imp				UL 746
0.016 in	149	--	°F
0.031 in	149	--	°F
0.06 in	149	--	°F
0.12 in	149	--	°F
RTI Str				UL 746
0.016 in	149	--	°F
0.031 in	149	--	°F
0.06 in	149	--	°F
0.12 in	149	--	°F

Electrical	Dry	Conditioned	Unit	Test Method
Volume Resistivity
0.0591 in	1.0E+15	1.0E+12	ohms·cm	ASTM D257
--	1.0E+15	1.0E+12	ohms·cm	IEC 60093
Dielectric Constant				IEC 60250
100 Hz	4.00	--
1 MHz	3.50	6.40
Dissipation Factor				IEC 60250
100 Hz	0.010	--
1 MHz	0.024	0.24
Comparative Tracking Index	600	600	V	IEC 60112
Flammability	Dry	Conditioned	Unit	Test Method
Flame Rating				UL 94
0.016 in	HB	--
0.031 in	HB	--
0.06 in	HB	--
0.12 in	HB	--

<del id="wu0e2"></del>

<tfoot id="wu0e2"></tfoot>

Products

Products

Ultramid? B3L

Products are widely used in plastic modification, automotive, construction, electrical and electronic, industrial, daily necessities and other fields

Online Service