亚洲精品成人无码中文毛片不卡,国产内射老熟女aaaa∵,亚洲精品www久久久久久

Ultrason? E 2010 MR SW 10111

Manufacturer: BASF
Produced At: Europe / China
Product Category: Polyethersulfone
Product No: Ultrason E2010 MR SW 10111
Product Quantity: 25KG / BAG
Product Features: Medium Viscosity

Product information

Ultrason? E 2010 MR SW 10111

Polyethersulfone

BASF Corporation

Product Description:

Unreinforced, medium viscosity standard injection moulding grade, demolding optimized.

Features	Medium Viscosity
Agency Ratings	EC 1907/2006 (REACH)
RoHS Compliance	RoHS Compliant
Forms	Pellets
Processing Method	Blow Molding Extrusion Injection Molding
Resin ID (ISO 1043)	PESU

Physical	Nominal Value	Unit	Test Method
Density	1.37	g/cm3	ISO 1183
Apparent (Bulk) Density	0.70 to 0.80	g/cm3
Melt Volume-Flow Rate (MVR) (360°C/10.0 kg)	4.27	in3/10min	ISO 1133
Molding Shrinkage			ISO 294-4
Across Flow	0.86	%
Flow	0.82	%
Water Absorption			ISO 62
Saturation, 73°F	2.2	%
Equilibrium, 73°F, 50% RH	0.80	%
Viscosity Number 2	56.0	cm3/g	ISO 307
Hardness	Nominal Value	Unit	Test Method
Ball Indentation Hardness (H 358/30)	22300	psi	ISO 2039-1

Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus	384000	psi	ISO 527-2
Tensile Stress (Yield)	12300	psi	ISO 527-2/50
Tensile Strain (Yield)	6.9	%	ISO 527-2/50
Tensile Creep Modulus 3 (1000 hr)	392000	psi	ISO 899-1
Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength			ISO 179/1eA
-22°F	3.3	ft·lb/in2
73°F	3.1	ft·lb/in2
Charpy Unnotched Impact Strength			ISO 179/1eU
-22°F	No Break
73°F	No Break
Notched Izod Impact Strength			ISO 180/A
-22°F	3.3	ft·lb/in2
73°F	3.1	ft·lb/in2

Thermal	Nominal Value	Unit	Test Method
Heat Deflection Temperature (264 psi, Unannealed)	401	°F	ISO 75-2/A
Glass Transition Temperature 4	437	°F	ISO 11357-2
CLTE - Flow
73 to 176°F	2.9E-5	in/in/°F	ISO 11359-2
356°F	3.3E-5	in/in/°F	DIN 53752
Maximum Service Temperature - short cycle operation	428	°F

Electrical	Nominal Value	Unit	Test Method
Volume Resistivity	> 1.0E+15	ohms·cm	IEC 60093
Electric Strength	940	V/mil	IEC 60243-1
Relative Permittivity			IEC 60250
100 Hz	3.90
1 MHz	3.80
Dissipation Factor			IEC 60250
100 Hz	1.7E-3
1 MHz	0.014
Comparative Tracking Index			IEC 60112
Solution A	100	V
Solution B	100	V
Flammability	Nominal Value	Unit	Test Method
Flammability Classification			IEC 60695-11-10, -20
0.06 in	V-0
0.12 in	V-0

Injection	Nominal Value	Unit
Drying Temperature	284	°F
Drying Time	4.0	hr
Suggested Max Moisture	0.020	%
Hopper Temperature	176	°F
Rear Temperature	644	°F
Middle Temperature	662	°F
Front Temperature	680	°F
Nozzle Temperature	680	°F
Processing (Melt) Temp	644 to 734	°F
Mold Temperature	284 to 356	°F
Screw Speed	< 709	in/min

Products

Products

Ultrason? E 2010 MR SW 10111

Products are widely used in plastic modification, automotive, construction, electrical and electronic, industrial, daily necessities and other fields

Online Service