无码精品人妻一区二区三区影院,再深点灬舒服灬太大了网站,久久九九亚洲

Akulon? K223-TP4

Manufacturer: Envalior/DSM
Produced At: Europe / China
Product Category: Nylon 6（PA6）
Product No: Akulon K223-TP4
Product Quantity: 25KG / BAG
Product Features: Impact Modified

Product information

Akulon? K223-TP4

Polyamide 6

Product Description:

Impact Modified

Special Features:

Contains release agent

Used In:

Lawnmower Trimmer Heads

Lawnmower Trimmer Housings

Akulon? is our family of high performance polyamide 6 and polyamide 66 materials, used by customers across the world in applications ranging from automotive, electronics & electrical, to furniture and packaging.
We offer Akulon? grades for injection molding, blow molding and extrusion (including barrier film, stock shapes, convoluted tubes, and mono and multi filament).
In molded parts the material offers an excellent balance of easy design and processing with outstanding mechanical properties over a wide temperature range and in diverse conditions. Meanwhile for extrusion the strength, resilience and easy processing of Akulon? sets the market standards.

Additive	Impact Modifier、Mold Release
Features	Impact Modified
Uses	Housings
Processing Method	Injection Molding
Multi-Point Data	Viscosity vs. Shear Rate (ISO 11403-2)
Resin ID (ISO 1043)	PA6-I

Physical	Dry	Conditioned	Unit	Test Method
Density	1.07	--	g/cm3	ISO 1183
Molding Shrinkage				ISO 294-4
Across Flow	1.7	--	%
Flow	1.4	--	%
Water Absorption				ISO 62
Saturation, 73°F	8.5	--	%
Equilibrium, 73°F, 50% RH	2.3	--	%

Mechanical	Dry	Conditioned	Unit	Test Method
Tensile Modulus	290000	90600	psi	ISO 527-2
Tensile Stress (Yield)	7250	4350	psi	ISO 527-2
Tensile Strain (Yield)	4.0	30	%	ISO 527-2
Nominal Tensile Strain at Break	> 50	> 50	%	ISO 527-2
Flexural Modulus	232000	--	psi	ISO 178
Flexural Stress	9430	--	psi	ISO 178
Impact	Dry	Conditioned	Unit	Test Method
Charpy Notched Impact Strength				ISO 179/1eA
-22°F	8.6	12	ft·lb/in2
73°F	31	36	ft·lb/in2
Charpy Unnotched Impact Strength				ISO 179/1eU
-22°F	No Break	No Break
73°F	No Break	No Break

Thermal	Dry	Conditioned	Unit	Test Method
Heat Deflection Temperature
66 psi, Unannealed	266	--	°F	ISO 75-2/B
264 psi, Unannealed	131	--	°F	ISO 75-2/A
CLTE				ISO 11359-2
Flow	6.7E-5	--	in/in/°F
Transverse	6.7E-5	--	in/in/°F
Effective Thermal Diffusivity	9.37E-8	--	m2/s

Electrical	Dry	Conditioned	Unit	Test Method
Volume Resistivity	1.0E+15	1.0E+13	ohms·cm	IEC 60093
Electric Strength	690	510	V/mil	IEC 60243-1
Relative Permittivity				IEC 60250
100 Hz	3.10	10.0
1 MHz	2.70	3.50
Dissipation Factor				IEC 60250
100 Hz	3.0E-3	0.16
1 MHz	0.016	0.10
Comparative Tracking Index	--	600	V	IEC 60112
Flammability	Dry	Conditioned	Unit	Test Method
Flammability Classification (0.06 in)	HB	--		IEC 60695-11-10, -20
Glow Wire Flammability Index				IEC 60695-2-12
0.06 in	1290	--	°F
0.08 in	1290	--	°F
Glow Wire Ignition Temperature				IEC 60695-2-13
0.06 in	1340	--	°F
0.08 in	1340	--	°F

Fill Analysis	Dry	Conditioned	Unit
Melt Density	0.869	--	g/cm3
Melt Thermal Conductivity	1.5	--	Btu·in/hr/ft2/°F
Specific Heat Capacity of Melt	0.655	--	Btu/lb/°F

Injection	Dry	Unit
Drying Temperature	176	°F
Drying Time	4.0 to 8.0	hr
Rear Temperature	446 to 455	°F
Middle Temperature	455 to 482	°F
Front Temperature	464 to 500	°F
Nozzle Temperature	464 to 518	°F
Processing (Melt) Temp	464 to 527	°F
Mold Temperature	122 to 176	°F
Injection Rate	Moderate-Fast
Back Pressure	435 to 1450	psi
Screw Compression Ratio	2.5:1.0

久久伊人免费视频-国产伦理一区-91亚洲视频-玖玖玖精品-久久99国产综合精品-一本一本久久a久久精品综合麻豆

Products

Products

Akulon? K223-TP4

Products are widely used in plastic modification, automotive, construction, electrical and electronic, industrial, daily necessities and other fields

Online Service