欧美久久影院,波多野结衣一区二区三区高清,亚洲欧美国产精品久久久久

<ul id="ikqe0"></ul>

<strike id="ikqe0"></strike>

Akulon? S223-F

Manufacturer: Envalior/DSM
Produced At: Europe / China
Product Category: Nylon 66（PA66）
Product No: Akulon S223-F
Product Quantity: 25KG / BAG
Product Features: Low Viscosity，Lubricated，Medium Viscosity

Product information

Akulon? S223-F

Polyamide 66

Product Description:

Low/Medium Viscosity

Special Features:

Contains release agent

Low viscosity

Lubricated

Medium viscosity

Akulon? is our family of high performance polyamide 6 and polyamide 66 materials, used by customers across the world in applications ranging from automotive, electronics & electrical, to furniture and packaging.
We offer Akulon? grades for injection molding, blow molding and extrusion (including barrier film, stock shapes, convoluted tubes, and mono and multi filament).
In molded parts the material offers an excellent balance of easy design and processing with outstanding mechanical properties over a wide temperature range and in diverse conditions. Meanwhile for extrusion the strength, resilience and easy processing of Akulon? sets the market standards.

Additive	Lubricant、Mold Release
Features	Low Viscosity、Lubricated、Medium Viscosity
Processing Method	Injection Molding
Multi-Point Data	Isothermal Stress vs. Strain (ISO 11403-1) Secant Modulus vs. Strain (ISO 11403-1) Shear Modulus vs. Temperature (ISO 11403-1) Specific Heat vs. Temperature (ISO 11403-2) Specific Volume vs Temperature (ISO 11403-2) Viscosity vs. Shear Rate (ISO 11403-2)
Resin ID (ISO 1043)	PA66

Physical	Dry	Conditioned	Unit	Test Method
Density	1.14	--	g/cm3	ISO 1183
Water Absorption				ISO 62
Saturation, 73°F	9.0	--	%
Equilibrium, 73°F, 50% RH	2.4	--	%

Mechanical	Dry	Conditioned	Unit	Test Method
Tensile Modulus	493000	218000	psi	ISO 527-2
Tensile Stress (Yield)	13100	8700	psi	ISO 527-2
Tensile Strain (Yield)	3.5	20	%	ISO 527-2
Nominal Tensile Strain at Break	40	> 50	%	ISO 527-2
Flexural Modulus	406000	--	psi	ISO 178
Flexural Stress	18100	--	psi	ISO 178
Impact	Dry	Conditioned	Unit	Test Method
Charpy Notched Impact Strength				ISO 179/1eA
-22°F	3.3	3.3	ft·lb/in2
73°F	3.3	6.7	ft·lb/in2
Charpy Unnotched Impact Strength				ISO 179/1eU
-22°F	No Break	No Break
73°F	No Break	No Break

Thermal	Dry	Conditioned	Unit	Test Method
Heat Deflection Temperature
66 psi, Unannealed	428	--	°F	ISO 75-2/B
264 psi, Unannealed	167	--	°F	ISO 75-2/A
Melting Temperature 3	500	--	°F	ISO 11357-3
CLTE				ISO 11359-2
Flow	5.6E-5	--	in/in/°F
Transverse	5.6E-5	--	in/in/°F
Effective Thermal Diffusivity	4.87E-8	--	m2/s

Electrical	Dry	Conditioned	Unit	Test Method
Volume Resistivity	1.0E+15	1.0E+12	ohms·cm	IEC 60093
Electric Strength	640	510	V/mil	IEC 60243-1
Relative Permittivity				IEC 60250
100 Hz	3.20	10.0
1 MHz	3.00	4.00
Dissipation Factor				IEC 60250
100 Hz	6.0E-3	0.14
1 MHz	0.017	0.10
Comparative Tracking Index	600	600	V	IEC 60112
Flammability	Dry	Conditioned	Unit	Test Method
Flammability Classification				IEC 60695-11-10, -20
0.06 in	V-2	--
0.12 in	V-2	--

Fill Analysis	Dry	Conditioned	Unit
Melt Density	0.969	--	g/cm3
Melt Thermal Conductivity	0.90	--	Btu·in/hr/ft2/°F
Specific Heat Capacity of Melt	0.657	--	Btu/lb/°F

Injection	Dry	Unit
Drying Temperature	176	°F
Drying Time	4.0 to 8.0	hr
Rear Temperature	509 to 545	°F
Middle Temperature	527 to 554	°F
Front Temperature	536 to 563	°F
Nozzle Temperature	536 to 554	°F
Processing (Melt) Temp	518 to 563	°F
Mold Temperature	122 to 176	°F
Injection Rate	Moderate-Fast
Back Pressure	435 to 1450	psi
Screw Compression Ratio	2.5:1.0

久久伊人免费视频-国产伦理一区-91亚洲视频-玖玖玖精品-久久99国产综合精品-一本一本久久a久久精品综合麻豆

Products

Products

Akulon? S223-F

Products are widely used in plastic modification, automotive, construction, electrical and electronic, industrial, daily necessities and other fields

Online Service