国产老妇真,伊人久久精品一区二区三区,av天堂永久资源网

Akulon? S223-D

Manufacturer: Envalior/DSM
Produced At: Europe / China
Product Category: Nylon 66（PA66）
Product No: Akulon S223-D
Product Quantity: 25KG / BAG
Product Features: Low Viscosity，Medium Viscosity，Nucleated

Product information

Akulon? S223-D

Polyamide 66

Product Description:

Low/Medium Viscosity, Nucleated

Special Features:

Contains release agent

Low viscosity

Medium viscosity

Nucleated

Used In:

Terminal Blocks

Akulon? is our family of high performance polyamide 6 and polyamide 66 materials, used by customers across the world in applications ranging from automotive, electronics & electrical, to furniture and packaging.
We offer Akulon? grades for injection molding, blow molding and extrusion (including barrier film, stock shapes, convoluted tubes, and mono and multi filament).
In molded parts the material offers an excellent balance of easy design and processing with outstanding mechanical properties over a wide temperature range and in diverse conditions. Meanwhile for extrusion the strength, resilience and easy processing of Akulon? sets the market standards.

Additive	Mold Release，Nucleating Agent
Features	Low Viscosity，Medium Viscosity，Nucleated
Uses	Electrical/Electronic Applications
Processing Method	Injection Molding
Multi-Point Data	Specific Heat vs. Temperature (ISO 11403-2) Specific Volume vs Temperature (ISO 11403-2)
Resin ID (ISO 1043)	PA66

Physical	Dry	Conditioned	Unit	Test Method
Density	1.14	--	g/cm3	ISO 1183
Molding Shrinkage				ISO 294-4
Across Flow	0.95	--	%
Flow	0.95	--	%
Water Absorption				ISO 62
Saturation, 73°F	8.5	--	%
Equilibrium, 73°F, 50% RH	2.3	--	%

Mechanical	Dry	Conditioned	Unit	Test Method
Tensile Modulus	522000	232000	psi	ISO 527-2
Tensile Stress (Yield)	13800	8700	psi	ISO 527-2
Tensile Strain (Yield)	4.0	20	%	ISO 527-2
Nominal Tensile Strain at Break	10	> 50	%	ISO 527-2
Flexural Modulus	406000	--	psi	ISO 178
Flexural Stress	18100	--	psi	ISO 178
Impact	Dry	Conditioned	Unit	Test Method
Charpy Notched Impact Strength				ISO 179/1eA
-22°F	2.9	2.9	ft·lb/in2
73°F	2.9	5.7	ft·lb/in2
Charpy Unnotched Impact Strength				ISO 179/1eU
-22°F	No Break	No Break
73°F	No Break	No Break

Thermal	Dry	Conditioned	Unit	Test Method
Heat Deflection Temperature
66 psi, Unannealed	419	--	°F	ISO 75-2/B
264 psi, Unannealed	185	--	°F	ISO 75-2/A
Melting Temperature 2	500	--	°F	ISO 11357-3
CLTE				ISO 11359-2
Flow	5.6E-5	--	in/in/°F
Transverse	5.6E-5	--	in/in/°F
Effective Thermal Diffusivity	4.87E-8	--	m2/s

Electrical	Dry	Conditioned	Unit	Test Method
Volume Resistivity	1.0E+15	1.0E+12	ohms·cm	IEC 60093
Electric Strength	760	640	V/mil	IEC 60243-1
Relative Permittivity				IEC 60250
100 Hz	3.20	15.0
1 MHz	3.00	4.30
Dissipation Factor				IEC 60250
100 Hz	6.0E-3	0.24
1 MHz	0.017	0.12
Comparative Tracking Index	--	600	V	IEC 60112

Fill Analysis	Dry	Conditioned	Unit
Melt Density	0.969	--	g/cm3
Melt Thermal Conductivity	0.90	--	Btu·in/hr/ft2/°F
Specific Heat Capacity of Melt	0.657	--	Btu/lb/°F

Injection	Dry	Unit
Drying Temperature	176	°F
Drying Time	4.0 to 8.0	hr
Rear Temperature	509 to 545	°F
Middle Temperature	527 to 554	°F
Front Temperature	536 to 563	°F
Nozzle Temperature	536 to 554	°F
Processing (Melt) Temp	518 to 563	°F
Mold Temperature	122 to 176	°F
Injection Rate	Moderate-Fast
Back Pressure	435 to 1450	psi
Screw Compression Ratio	2.5:1.0

久久伊人免费视频-国产伦理一区-91亚洲视频-玖玖玖精品-久久99国产综合精品-一本一本久久a久久精品综合麻豆

Products

Products

Akulon? S223-D

Products are widely used in plastic modification, automotive, construction, electrical and electronic, industrial, daily necessities and other fields

Online Service