国产成人精品av,国产免费av电影,欧美午夜刺激影院

<del id="e4cg0"></del>

Arnite? A06 700

Manufacturer: Envalior/DSM
Produced At: Europe / China
Product Category: Polyethylene Terephthalate（PET）
Product No: Arnite A06 700
Product Quantity: 25KG / BAG
Product Features: High Viscosity

Product information

Arnite? A06 700

Polyethylene Terephthalate

Product Description:

Very High Viscosity, Improved Impact, Extrusion

Special Features:

High viscosity

Arnite? (PBT, PET and blends) are high-performance engineering plastics that combine high strength and rigidity with excellent processing characteristics. As a result, Arnite? A (PET) and Arnite? T (PBT) are well suited for a broad range of automotive, electrical & electronic and consumer goods applications.
A wide portfolio of Arnite? is available including unreinforced, reinforced and flame retardant grades.

Features	High Viscosity
Processing Method	Extrusion，Injection Molding
Resin ID (ISO 1043)	PET

Physical	Nominal Value	Unit	Test Method
Density	1.40	g/cm3	ISO 1183
Water Absorption (Equilibrium, 73°F, 50% RH)	0.30	%	ISO 62

Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus	326000	psi	ISO 527-2
Tensile Stress (Yield)	7250	psi	ISO 527-2
Tensile Strain (Yield)	4.0	%	ISO 527-2
Nominal Tensile Strain at Break	> 50	%	ISO 527-2
Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength (73°F)	4.8	ft·lb/in2	ISO 179/1eA

Thermal	Nominal Value	Unit	Test Method
Melting Temperature 2	491	°F	ISO 11357-3
CLTE			ISO 11359-2
Flow	4.2E-5	in/in/°F
Transverse	4.2E-5	in/in/°F

Electrical	Nominal Value	Unit	Test Method
Volume Resistivity	> 1.0E+15	ohms·cm	IEC 60093

Fill Analysis	Nominal Value	Unit	Test Method
Melt Thermal Conductivity	1.4	Btu·in/hr/ft2/°F
Specific Heat Capacity of Melt	0.490	Btu/lb/°F
Additional Information	Nominal Value	Unit	Test Method
RSV - m-cresol, 1g/100ml	2.10		Internal Method

Injection	Nominal Value	Unit
Drying Temperature	212 to 248	°F
Drying Time	3.0 to 12	hr
Rear Temperature	518 to 536	°F
Middle Temperature	518 to 554	°F
Front Temperature	518 to 554	°F
Nozzle Temperature	518 to 554	°F
Processing (Melt) Temp	518 to 554	°F
Mold Temperature	266 to 284	°F
Injection Rate	Moderate-Fast
Back Pressure	435 to 1450	psi
Screw Compression Ratio	2.5:1.0

久久伊人免费视频-国产伦理一区-91亚洲视频-玖玖玖精品-久久99国产综合精品-一本一本久久a久久精品综合麻豆

Products

Products

Arnite? A06 700

Products are widely used in plastic modification, automotive, construction, electrical and electronic, industrial, daily necessities and other fields

Online Service