Desmopan? 9380AU
Thermoplastic Polyurethane Elastomer (Polyether)
Extrusion- and injection molding grade; very good hydrolysis and microbial resistance; good low-temperature flexibility; complies with VDE 0282-10; with special UV stabilizers; Application; Cable sheathings; Hoses, non-reinforced; Technical parts
Features | - Hydrolysis Resistant，Low Temperature Flexibility，Microbe Resistant
|
Uses | - Cable Jacketing，Engineering PartsHose
|
Agency Ratings | |
RoHS Compliance | |
Processing Method | - Extrusion，Injection Molding
|
Density |
|
|
|
73°F | 1.11 | g/cm3 | ISO 1183 |
-- | 0.0401 | lb/in3 | ISO 1183 2 |
Shore Hardness |
|
|
|
Shore A, 1 sec, 73°F | 80 |
| ISO 7619 |
Shore D, 1 sec, 73°F | 31 |
| ISO 7619 |
Shore A, 3 sec | 80 |
| ISO 868 2 |
Shore D, 15 sec | 31 |
| ISO 868 2 |
Tensile Stress 3 |
|
| DIN 53504 |
Break, 73°F | 5930 | psi |
|
10% Strain, 73°F | 203 | psi |
|
50% Strain, 73°F | 551 | psi |
|
100% Strain, 73°F | 740 | psi |
|
300% Strain, 73°F | 1290 | psi |
|
Tensile Strain 3 (Break, 73°F) | 630 | % | DIN 53504 |
Abrasion Resistance 4 | 20.0 | mm3 | ISO 4649 |
Tensile Storage Modulus |
|
| ISO 6721 |
-4°F | 10588 | psi |
|
68°F | 5366 | psi |
|
140°F | 4351 | psi |
|
Tear Strength 5 (73°F) | 290 | lbf/in | ISO 34-1 |
Compression Set |
|
| ISO 815 |
73°F, 72 hr | 25 | % |
|
158°F, 24 hr 4 | 42 | % |
|
Rebound Resilience | 50 | % | ISO 4662 |
Drying Temperature | < 176 | °F |
|
Processing (Melt) Temp | 401 to 437 | °F |
|
Mold Temperature | 68 to 104 | °F |
|
Drying Temperature | < 176 | °F |
|
Melt Temperature | 383 to 419 | °F |
|
