VESTAMID? L L2141
Polyamide 12
Unfilled VESTAMID? polyamide 12 compounds
Characterization: high viscosity, light and higher heat stabilized than L2140, with processing aid
Applications: hydraulic clutch lines, vacuum lines
In general, it can be said that long-chain, semi-crystalline polyamides absorb little water, are resistant to polar and non-polar solvents, exhibit low creep behavior and high impact resistance and can be used in a wide temperature range. Virtually no other polymer material in this price range exhibits these properties.
Additive | - Heat Stabilizer，Processing Aid，UV Stabilizer
|
Features | - Abrasion Resistant、Excellent Processability、Fatigue Resistant、Food Contact Acceptable、Fuel Resistant、Grease Resistant、Heat Stabilized、High ESCR (Stress Crack Resist.)、High Impact Resistance、High Viscosity、Light Stabilized、Low Friction、Low Temperature Impact Resistance、Low to No Water Absorption、Noise Damping、Oil Resistant、Semi Crystalline、Solvent Resistant、Vibration Damping
|
Uses | |
Agency Ratings | - EU 10/2011，F(xiàn)DA 21 CFR 177.1500
|
Appearance | - Black，Colors Available，Natural Color
|
Forms | |
Processing Method | |
Density | 1.01 | g/cm3 | ISO 1183 |
Molding Shrinkage |
|
| ISO 294-4 |
Across Flow | 1.3 | % |
|
Flow | 0.70 | % |
|
Water Absorption |
|
| ISO 62 |
Saturation, 73°F | 1.5 | % |
|
Equilibrium, 73°F, 50% RH | 0.70 | % |
|
Tensile Modulus | 218000 | psi | ISO 527-2 |
Tensile Stress (Yield) | 6670 | psi | ISO 527-2 |
Tensile Strain |
|
| ISO 527-2 |
Yield | 5.0 | % |
|
Break | > 50 | % |
|
Charpy Notched Impact Strength |
|
| ISO 179/1eA |
-22°F, Complete Break | 3.8 | ft·lb/in2 |
|
73°F, Complete Break | 4.8 | ft·lb/in2 |
|
Charpy Unnotched Impact Strength |
|
| ISO 179/1eU |
-22°F | No Break |
|
|
73°F | No Break |
|
|
Heat Deflection Temperature |
|
|
|
66 psi, Unannealed | 230 | °F | ISO 75-2/B |
264 psi, Unannealed | 122 | °F | ISO 75-2/A |
Vicat Softening Temperature |
|
|
|
-- | 338 | °F | ISO 306/A |
-- | 284 | °F | ISO 306/B |
Melting Temperature 2 | 352 | °F | ISO 11357-3 |
CLTE - Flow (73 to 131°F) | 8.3E-5 | in/in/°F | ISO 11359-2 |
Volume Resistivity | 1.0E+12 | ohms·cm | IEC 60093 |
Electric Strength | 890 | V/mil | IEC 60243-1 |
Relative Permittivity |
|
| IEC 60250 |
73°F, 100 Hz | 9.70 |
|
|
73°F, 1 MHz | 4.00 |
|
|
Dissipation Factor |
|
| IEC 60250 |
73°F, 100 Hz | 0.21 |
|
|
73°F, 1 MHz | 0.11 |
|
|
Comparative Tracking Index |
|
| IEC 60112 |
-- | 600 | V |
|
Solution A 3 | > 600 | V |
|
Flammability Classification |
|
| IEC 60695-11-10, -20 |
0.06 in | HB |
|
|
0.13 in | HB |
|
|
Electrolytical Corrosion | A1 |
| IEC 60426 |
ISO Shortname | PA12, EHL, 22-010 |
| ISO 1874 |
