久久伊人免费视频-国产伦理一区-91亚洲视频-玖玖玖精品-久久99国产综合精品-一本一本久久a久久精品综合麻豆

Products

CYCOLOY? FR Resin C2800

CYCOLOY? FR Resin C2800

Manufacturer: SABIC
Produced At: Import/ China
Product Category: Polycarbonate + ABS
Product No: CYCOLOY FR Resin C2800
Product Quantity: 25KG / BAG
Product Features: Bromine Free，Chlorine Free，Flame Retardant，Good Flow，Good Impact Resistance

CYCOLOY? FR Resin C2800

Polycarbonate + ABS
Product Description:
CYCOLOY C2800 Polycarbonate/Acrylonitrile Butadiene Styrene (PC/ABS) resin is a standard grade that can be injection molded. This non-chlorinated, non-brominated flame retardant PC/ABS has a UL V0 & 5VB flame rating. CYCOLOY C2800 resin is an excellent candidate for a wide variety of applications including business equipment, monitors, and enclosures.
Additive 

  • Flame Retardant

Features 
  • Bromine Free，Chlorine Free，Flame Retardant，Good Flow，Good Impact Resistance
Uses 
  • Appliances，Automotive Interior Parts，Construction Applications，Electrical/Electronic Applications，Electronic Displays，Household Goods，Lighting Applications，Medical/Healthcare Applications，Pharmaceuticals
Processing Method 

  • Injection Molding

Multi-Point Data 

  • Coefficient of Thermal Expansion vs. Temperature (ASTM E831)

  • Elastic Modulus vs Temperature (ASTM D4065)

  • Flexural DMA (ASTM D4065)

  • Instrumented Impact (Energy) (ASTM D3763)

  • Instrumented Impact (Load) (ASTM D3763)

  • Pressure-Volume-Temperature (PVT - Zoller Method)

  • Specific Heat vs. Temperature (ASTM D3417)

  • Tensile Creep (ASTM D2990)

  • Tensile Fatigue

  • Tensile Stress vs. Strain (ASTM D638)

  • Thermal Conductivity vs. Temperature (ASTM E1530)

  • Viscosity vs. Shear Rate (ASTM D3835)

Also Available In 

  • Asia Pacific

Physical
Nominal Value
Unit
Test Method
Density / Specific Gravity


ASTM D792
--
1.17


-- 3
1.18


Melt Mass-Flow Rate (MFR) (260°C/2.16 kg)
16
g/10 min
ASTM D1238
Molding Shrinkage


Internal Method
Flow : 0.126 in
4.0E-3 to 6.0E-3
in/in

Across Flow : 0.126 in
4.0E-3 to 6.0E-3
in/in

Water Absorption


ASTM D570
24 hr
0.10
%

Equilibrium, 73°F
0.40
%

Hardness
Nominal Value
Unit
Test Method
Rockwell Hardness (R-Scale)
120

ASTM D785
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus 4
389000
psi
ASTM D638
Tensile Strength 5 (Yield)
8410
psi
ASTM D638
Tensile Elongation 5


ASTM D638
Yield
5.0
%

Break
50
%

Flexural Modulus 6 (3.94 in Span)
389000
psi
ASTM D790
Flexural Strength 6 (Yield, 3.94 in Span)
13900
psi
ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact (73°F)
8.0
ft·lb/in
ASTM D256
Instrumented Dart Impact (73°F, Total Energy)
513
in·lb
ASTM D3763
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load


ASTM D648
264 psi, Unannealed, 0.126 in
163
°F

264 psi, Unannealed, 0.252 in
176
°F

Vicat Softening Temperature
194
°F
ASTM D1525 7
CLTE


ASTM E831
Flow : -40 to 140°F
4.0E-5
in/in/°F

Transverse : -40 to 140°F
4.0E-5
in/in/°F

Thermal Conductivity
1.4
Btu·in/hr/ft2/°F
ASTM C177
RTI Elec
176
°F
UL 746
RTI Imp
158
°F
UL 746
RTI Str
176
°F
UL 746
Electrical
Nominal Value
Unit
Test Method
Surface Resistivity
> 1.0E+14
ohms
ASTM D257
Volume Resistivity
1.0E+17
ohms·cm
ASTM D257
Dielectric Strength (0.126 in, in Oil)
450
V/mil
ASTM D149
Dielectric Constant


ASTM D150
60 Hz
3.00


100 Hz
3.00


50 kHz
3.00


Dissipation Factor


ASTM D150
50 Hz
4.8E-3


60 Hz
4.8E-3


Arc Resistance 8
PLC 6

ASTM D495
Comparative Tracking Index (CTI)
PLC 1

UL 746
High Amp Arc Ignition (HAI) 9
PLC 0

UL 746
High Voltage Arc Tracking Rate (HVTR)
PLC 3

UL 746
Hot-wire Ignition (HWI)
PLC 3

UL 746
Flammability
Nominal Value
Unit
Test Method
Flame Rating


UL 94
0.03 in
V-2


0.06 in
V-0


0.09 in
5VB


Oxygen Index
35
%
ASTM D2863
Injection
Nominal Value
Unit

Drying Temperature
167 to 176
°F

Drying Time
3.0 to 4.0
hr

Suggested Max Moisture
0.040
%

Suggested Shot Size
30 to 80
%

Rear Temperature
410 to 491
°F

Middle Temperature
419 to 500
°F

Front Temperature
437 to 527
°F

Nozzle Temperature
446 to 527
°F

Processing (Melt) Temp
446 to 527
°F

Mold Temperature
122 to 158
°F

Back Pressure
43.5 to 102
psi

Screw Speed
40 to 70
rpm

Vent Depth
1.5E-3 to 3.0E-3
in

Injection Notes
Injection Molding Parameters

  • Drying Time (Cumulative): 8 hrs


Products are widely used in plastic modification, automotive, construction, electrical and electronic, industrial, daily necessities and other fields


Consultation

Shanghai Langqi Plastic Materials Co., Ltd.   滬ICP備12022668號 公安機關備案號：31011202003696

展開
主站蜘蛛池模板： 男人进入女人下部视频| 人妻熟人中文字幕一区二区| 亚洲欧美经典| 亚洲国产精品久久| a片在线免费观看| 亚洲欧美高清在线精品一区二区 | 国产亚洲精品久久久久婷婷瑜伽| bthd高清完整电影| 无码专区无码专区视频网址| 成年无码av片在线| 精品av天堂毛片久久久| 亚洲精品电影院| 国语国产精精品国产国语清晰对话 | 最新国产精品自在线观看| 中文字幕乱偷无码av先锋| 伊人久久大香线蕉综合影视| 日本中文字幕乱码aa高清电影| 每日更新国产精品视频| 伊人久久久大香线蕉综合直播 | 中文字幕人妻丝袜成熟乱| 成年美女黄网站18禁免费| 免费无码毛片一区二三区| 菠萝菠萝蜜午夜视频在线播放观看 | www成人国产高清内射| 极品无码av国模在线观看| 波多野结衣中文字幕一区二区三区| 91蝌蚪九色| 日日摸日日碰夜夜爽亚洲 | 亚洲天天做日日做天天谢日日欢| …日韩人妻无码精品一专区| 亚洲一区无码中文字幕| 5d肉蒲团之性战奶水| 精品日本一区二区三区免费| 人妻体体内射精一区二区| 久久亚洲精品情侣| 国产精品视频一区二区三区不卡 | 国产视频播放| 精品无码成人久久久久久| 亚洲国产av无码精品色午夜| 免费观看成人毛片a片| 精品人妻中文av一区二区三区|