Radilon? A RV300K 990 GRI
Polyamide 66
PA66 30% glass fiber reinforced injection moulding grade, low friction. Heat stabilized. Natural grey colour.
Suitable for parts requiring high stiffness, good mechanical resistance and low friction, along with good heat ageing properties retention. Particularly apt for components requiring improved wear resistance, such as gears, bearings, and cams.
ISO 1043 : PA66-T GF30
Filler / Reinforcement | |
Additive | |
Features | - Heat Aging Resistant，Heat Stabilized，High Stiffness，Low Friction，Wear Resistant
|
Uses | |
RoHS Compliance | |
UL File Number | |
Appearance | |
Processing Method | |
Resin ID (ISO 1043) | |
Density | 1.35 | -- | g/cm3 | ISO 1183 |
Water Absorption |
|
|
| ISO 62 |
Saturation, 73°F, 0.0787 in | 7.0 | -- | % |
|
Equilibrium, 73°F, 0.0787 in, 50% RH | 1.7 | -- | % |
|
Tensile Modulus | 1.48E+6 | -- | psi | ISO 527-2/1A/1 |
Tensile Stress (Break) | 25400 | -- | psi | ISO 527-2/1A/5 |
Tensile Strain (Break) | 3.5 | -- | % | ISO 527-2/1A/5 |
Flexural Modulus 3 | 1.35E+6 | -- | psi | ISO 178 |
Flexural Stress 3 | 37700 | -- | psi | ISO 178 |
Charpy Unnotched Impact Strength(73°F) | 40 | -- | ft·lb/in2 | ISO 179/1eU |
Heat Deflection Temperature |
|
|
|
|
66 psi, Unannealed | 491 | -- | °F | ISO 75-2/Bf |
264 psi, Unannealed | 464 | -- | °F | ISO 75-2/Af |
Vicat Softening Temperature | 464 | -- | °F | ISO 306/B50 |
Melting Temperature 4 | 500 | -- | °F | ISO 11357 |
Surface Resistivity | 1.0E+12 | 1.0E+10 | ohms | IEC 60093 |
Volume Resistivity | 1.0E+15 | 1.0E+13 | ohms·cm | IEC 60093 |
Comparative Tracking Index | 500 | -- | V | IEC 60112 |
Burning Rate | 0.0 | -- | in/min | FMVSS 302 |
Flame Rating (0.031 in) | HB | -- |
| UL 94 |
Glow Wire Flammability Index (0.08 in) | 1290 | -- | °F | IEC 60695-2-12 |
Drying Temperature - Desiccant Dryer | 176 | °F |
|
Drying Time - Desiccant Dryer | 2.0 to 4.0 | hr |
|
Dew Point - Desiccant Dryer | < -4 | °F |
|
Suggested Max Moisture | 0.15 | % |
|
Processing (Melt) Temp | 536 to 572 | °F |
|
Mold Temperature | 176 to 212 | °F |
|
Injection Rate | Moderate-Fast |
|
|
