国产成人精品一区二三区,91短视频免费下载,国产欧美日韩在线

Radilon? A CP400 333 NER

Manufacturer: RADICI
Produced At: Europe / China
Product Category: Polyamide 66 (Nylon 66)
Product No: Radilon A CP400 333 NER
Product Quantity: 25KG / BAG
Product Features: Filled，Good Dimensional Stability，Low Shrinkage，Low Warpage

Product information

Radilon? A CP400 333 NER

Polyamide 66

Radici Plastics

Product Description:

PA66 40% mineral filled injection moulding grade. Black colour.

Suitable for parts requiring good dimensional stability, reduced shrinkage and low warpage.

ISO 1043 : PA66 MX40

Filler / Reinforcement	Mineral, 40% Filler by Weight
Features	Filled，Good Dimensional Stability，Low Shrinkage，Low Warpage
RoHS Compliance	RoHS Compliant
Appearance	Black
Processing Method	Injection Molding
Resin ID (ISO 1043)	PA66 MX40

Physical	Dry	Conditioned	Unit	Test Method
Density	1.47	--	g/cm3	ISO 1183
Molding Shrinkage 2				ISO 294-4
Across Flow	1.3	--	%
Flow	1.2	--	%
Water Absorption				ISO 62
Saturation, 73°F, 0.0787 in	5.7	--	%
Equilibrium, 73°F, 0.0787 in, 50% RH	1.8	--	%

Mechanical	Dry	Conditioned	Unit	Test Method
Tensile Modulus	841000	435000	psi	ISO 527-2/1A/1
Tensile Stress (Break)	12300	6530	psi	ISO 527-2/1A/5
Tensile Strain (Break)	7.0	10	%	ISO 527-2/1A/5
Flexural Modulus 3	769000	--	psi	ISO 178
Flexural Stress 3	21800	--	psi	ISO 178
Impact	Dry	Conditioned	Unit	Test Method
Charpy Notched Impact Strength				ISO 179/1eA
-22°F	2.1	--	ft·lb/in2
73°F	2.4	2.9	ft·lb/in2
Charpy Unnotched Impact Strength				ISO 179/1eU
-22°F	26	--	ft·lb/in2
73°F	33	38	ft·lb/in2

Thermal	Dry	Conditioned	Unit	Test Method
Heat Deflection Temperature (264 psi, Unannealed)	212	--	°F	ISO 75-2/Af
Vicat Softening Temperature	473	--	°F	ISO 306/B50
Melting Temperature	500	--	°F	ISO 11357

Electrical	Dry	Conditioned	Unit	Test Method
Surface Resistivity	1.0E+12	1.0E+10	ohms	IEC 60093
Volume Resistivity	1.0E+15	1.0E+13	ohms·cm	IEC 60093
Comparative Tracking Index	500	--	V	IEC 60112
Flammability	Dry	Conditioned	Unit	Test Method
Burning Rate	0.0	--	in/min	FMVSS 302
Flame Rating (0.031 in)	HB	--		UL 94
Glow Wire Flammability Index (0.08 in)	1290	--	°F	IEC 60695-2-12

Injection	Dry	Unit
Drying Temperature - Desiccant Dryer	176	°F
Drying Time - Desiccant Dryer	2.0 to 4.0	hr
Dew Point - Desiccant Dryer	< -4	°F
Suggested Max Moisture	0.15	%
Processing (Melt) Temp	536 to 572	°F
Mold Temperature	176 to 212	°F
Injection Rate	Moderate-Fast

Products

Products

Radilon? A CP400 333 NER

Products are widely used in plastic modification, automotive, construction, electrical and electronic, industrial, daily necessities and other fields

Online Service