国内自拍户外极限,夜夜国产亚洲视频香蕉,亚洲自拍偷拍免费视频

Stanyl? TW363

Manufacturer: Envalior/DSM
Produced At: Europe / China
Product Category: Polyamide 46（PA46）
Product No: Stanyl TW363
Product Quantity: 25KG / BAG
Product Features: Heat Stabilized，Impact Modified，Platable

Product information

Stanyl? TW363

Polyamide 46

Product Description:

Heat Stabilized, Impact Modified

Special Features:

Heat stabilized or stable to heat

Platable

Used In:

Convoluted Tubes

Front End Accessory Drive Parts: Belt Tensioner,Damping bands, Shoes and Bushings

Stanyl? is our high-performance polyamide 46 used for applications in automotive, E&E, gears and outdoor power equipments.
Stanyl is a high performance polyamide that provides unmatched performance and value for demanding applications in which superior heat resistance, design stiffness, wear & friction and process flow qualities are required.
Because Stanyl retains its mechanical properties at high temperatures up to 220°C, this makes it ideal for extremely high-performance applications, where it outperforms PPA, PA6T, PA9T, and often PPS and LCP.

Additive	Heat Stabilizer、Impact Modifier
Features	Heat Stabilized、Impact Modified、Platable
Uses	Bushings、Footwear、Tubing
Processing Method	Extrusion、Injection Molding
Multi-Point Data	Isothermal Stress vs. Strain (ISO 11403-1) Secant Modulus vs. Strain (ISO 11403-1)
Resin ID (ISO 1043)	PA46-I

Physical	Dry	Conditioned	Unit	Test Method
Density	1.10	--	g/cm3	ISO 1183
Molding Shrinkage				ISO 294-4
Across Flow	2.0	--	%
Flow	2.0	--	%
Water Absorption				ISO 62
Saturation, 73°F	11	--	%
Equilibrium, 73°F, 50% RH	3.0	--	%

Mechanical	Dry	Conditioned	Unit	Test Method
Tensile Modulus				ISO 527-2
--	268000	87000	psi
248°F	58000	--	psi
320°F	50800	--	psi
Tensile Stress				ISO 527-2
Yield	8700	6530	psi
Yield, 248°F	5080	--	psi
Yield, 320°F	4350	--	psi
Tensile Strain (Yield)	20	25	%	ISO 527-2
Nominal Tensile Strain at Break	> 50	> 50	%	ISO 527-2
Flexural Modulus				ISO 178
--	261000	79800	psi
248°F	58000	--	psi
320°F	50800	--	psi
Impact	Dry	Conditioned	Unit	Test Method
Charpy Notched Impact Strength				ISO 179/1eA
-22°F	12	14	ft·lb/in2
73°F	36	59	ft·lb/in2
Charpy Unnotched Impact Strength				ISO 179/1eU
-22°F	No Break	No Break
73°F	No Break	No Break
Notched Izod Impact Strength				ISO 180/1A
-40°F	19	19	ft·lb/in2
73°F	38	59	ft·lb/in2

Thermal	Dry	Conditioned	Unit	Test Method
Heat Deflection Temperature
66 psi, Unannealed	392	--	°F	ISO 75-2/B
264 psi, Unannealed	194	--	°F	ISO 75-2/A
Glass Transition Temperature 2	167	--	°F	ISO 11357-2
Vicat Softening Temperature	482	--	°F	ISO 306/B50
Melting Temperature 2	563	--	°F	ISO 11357-3
CLTE				ISO 11359-2
Flow	8.9E-5	--	in/in/°F
Transverse	1.0E-4	--	in/in/°F
Effective Thermal Diffusivity	9.82E-7	--	m2/s
Thermal Index - 5000 hr	275	--	°F	IEC 60216

Electrical	Dry	Conditioned	Unit	Test Method
Volume Resistivity	1.0E+15	1.0E+9	ohms·cm	IEC 60093
Electric Strength	640	380	V/mil	IEC 60243-1
Relative Permittivity				IEC 60250
100 Hz	3.60	14.0
1 MHz	3.20	4.00
Dissipation Factor				IEC 60250
100 Hz	0.012	0.65
1 MHz	0.019	0.10
Comparative Tracking Index	475	--	V	IEC 60112
Flammability	Dry	Conditioned	Unit	Test Method
Oxygen Index	27	--	%	ISO 4589-2

Fill Analysis	Dry	Conditioned	Unit
Melt Density	0.913	--	g/cm3
Melt Thermal Conductivity	1.7	--	Btu·in/hr/ft2/°F
Specific Heat Capacity of Melt	0.609	--	Btu/lb/°F

Injection	Dry	Unit
Drying Temperature	176	°F
Drying Time	4.0 to 8.0	hr
Rear Temperature	536 to 608	°F
Middle Temperature	572 to 608	°F
Front Temperature	572 to 608	°F
Nozzle Temperature	572 to 608	°F
Processing (Melt) Temp	590 to 608	°F
Mold Temperature	176 to 248	°F
Injection Rate	Moderate-Fast
Back Pressure	290 to 1450	psi

久久伊人免费视频-国产伦理一区-91亚洲视频-玖玖玖精品-久久99国产综合精品-一本一本久久a久久精品综合麻豆

Products

Products

Stanyl? TW363

Products are widely used in plastic modification, automotive, construction, electrical and electronic, industrial, daily necessities and other fields

Online Service