李丽珍aa一级a毛片,国产午夜视频在线观看,亚洲一区在线免费

Stanyl? TW200B6

Manufacturer: Envalior/DSM
Produced At: Europe / China
Product Category: Polyamide 46（PA46）
Product No: Stanyl TW200B6
Product Quantity: 25KG / BAG
Product Features: Heat Stabilized，Lubricated

Product information

Stanyl? TW200B6

Polyamide 46

Product Description:

30% Carbon Reinforced, Heat Stabilized, Lubricated

Special Features:

Heat stabilized or stable to heat

Lubricated

Used In:

Automotive Bearing Cages

Crankshaft Balance Gears

Stanyl? is our high-performance polyamide 46 used for applications in automotive, E&E, gears and outdoor power equipments.
Stanyl is a high performance polyamide that provides unmatched performance and value for demanding applications in which superior heat resistance, design stiffness, wear & friction and process flow qualities are required.
Because Stanyl retains its mechanical properties at high temperatures up to 220°C, this makes it ideal for extremely high-performance applications, where it outperforms PPA, PA6T, PA9T, and often PPS and LCP.

Filler / Reinforcement	Carbon Fiber, 30% Filler by Weight
Additive	Heat Stabilizer、Lubricant
Features	Heat Stabilized、Lubricated
Uses	Automotive Applications、Bearings、Gears
Processing Method	Injection Molding
Resin ID (ISO 1043)	PA46-CF30

Physical	Dry	Conditioned	Unit	Test Method
Density	1.28	--	g/cm3	ISO 1183
Molding Shrinkage				ISO 294-4
Across Flow	0.90	--	%
Flow	0.20	--	%
Water Absorption				ISO 62
Saturation, 73°F	9.5	--	%
Equilibrium, 73°F, 50% RH	2.6	--	%

Mechanical	Dry	Conditioned	Unit	Test Method
Tensile Modulus				ISO 527-2
--	3.48E+6	--	psi
248°F	1.45E+6	--	psi
320°F	1.28E+6	--	psi
356°F	1.20E+6	--	psi
Tensile Stress				ISO 527-2
Break	34800	21800	psi
Break, 248°F	18100	--	psi
Break, 320°F	15200	--	psi
Break, 356°F	13800	--	psi
Tensile Strain				ISO 527-2
Break	2.0	4.0	%
Break, 248°F	3.0	--	%
Break, 320°F	3.0	--	%
Break, 356°F	3.0	--	%
Flexural Modulus	2.68E+6	1.33E+6	psi	ISO 178
Impact	Dry	Conditioned	Unit	Test Method
Charpy Notched Impact Strength				ISO 179/1eA
-22°F	3.1	3.1	ft·lb/in2
73°F	3.8	6.7	ft·lb/in2
Charpy Unnotched Impact Strength				ISO 179/1eU
-22°F	24	24	ft·lb/in2
73°F	29	36	ft·lb/in2
Notched Izod Impact Strength				ISO 180/1A
-40°F	3.1	3.1	ft·lb/in2
73°F	3.8	6.7	ft·lb/in2

Injection	Dry	Unit
Drying Temperature	176	°F
Drying Time	4.0 to 8.0	hr
Rear Temperature	536 to 608	°F
Middle Temperature	572 to 608	°F
Front Temperature	572 to 608	°F
Nozzle Temperature	572 to 608	°F
Processing (Melt) Temp	581 to 608	°F
Mold Temperature	176 to 248	°F
Injection Rate	Moderate-Fast
Back Pressure	290 to 1450	psi
Screw Compression Ratio	2.5:1.0

久久伊人免费视频-国产伦理一区-91亚洲视频-玖玖玖精品-久久99国产综合精品-一本一本久久a久久精品综合麻豆

Products

Products

Stanyl? TW200B6

Products are widely used in plastic modification, automotive, construction, electrical and electronic, industrial, daily necessities and other fields

Online Service